Window Glass Repair - Chantilly, VA:

Repairing the Window Glass like Experts
Difficulty: Average
Time Required: Two to three hours for the Window Glass Repair
Here’s How to Repair a Broken Pane of Glass
Wear work gloves and safety glasses while completing the repair.
Remove the broken shards of glass from the frame, one piece at a time, taking care to protect yourself from being cut by the razor-sharp edges. Even wearing gloves, don’t take any chances: Lay a towel over the glass and use that to help remove it, wiggling each piece out slowly. Save some shards to take to the store if you want to match the replacement glass more accurately.
Wrap the broken glass in newspaper and dispose of it in a bag, box or other container.
Measure the size of the window opening and subtract 1/16 to 1/8 of an inch from both the length and width when ordering a replacement pane. It is important to take exact measurements.Window Glass Repair Virginia services provided by us include these steps and also other technical advances.
If the frame is vinyl or metal, pull out the spring clips or vinyl splines with pliers or a screwdriver and skip to step 10.
If the frame is wood, remove the old putty or glazing compound from the window using a putty knife or chisel. A heat gun will help soften the putty and make it easier to remove. Heat an area just before you scrape, removing a little at a time. Trying to remove too much at once can damage the frame.
Using a pair of pliers, pull out the glazier’s points – the little metal triangles in the frame beneath the beads of putty that held the pane in place.
Clean the area and lightly sand the frame. Use a small paintbrush to apply a coat of linseed oil to the frame. The oil will help the glazing compound stay pliable while you install the new pane of glass.
Apply a thin layer of glazing compound around the frame with the glazing tool. The glazing compound should be the consistency of thick dough, which will provide good cushioning when you insert the new pane.
Insert the replacement glass into the wood frame and press firmly. If the frame is vinyl or metal, insert the replacement glass and reinsert the spring clips or vinyl splines. Replace the spring clips if the old ones are damaged or corroded. Skip to step 13.
Hold the pane in place and insert glazier’s points into the corner using the glazing tool.
Insert glazier’s points every 4 inches around the glass and drive them into the wood with the glazing tool.
Knead glazing compound into strips the thickness of a pencil. Place it around the edges of the newly installed pane of glass, pressing it into place between pane and frame with your fingers.
Coat the blade of the glazing tool with linseed oil and smooth the glazing compound. Hold the tool at a 45-degree angle in a corner and slide it toward the opposite corner with one stroke. (The glazing compound should cover the glazier’s points, but be careful not to spread the glazing compound so it is visible in the windowpane.) This is how Window Glass Repair Chantilly, VA can be done by yourself as well.